Jilin Daxue Xuebao (Gongxueban) / Journal of Jilin University (Engineering and Technology Edition): Scopus, Scope & Submission Guide

Quick Answer: What Is Jilin Daxue Xuebao (Gongxueban)?

The journal is an engineering-focused academic periodical of Jilin University. The official journal introduction states that it was founded in 1957, was formerly titled the Journal of Jilin University of Technology, and adopted its current title in 2002 after institutional restructuring. The current official site describes it as a monthly journal.

Its published research is concentrated in engineering and technology. Recent issues show clearly defined groups such as vehicle and mechanical engineering, transportation and civil engineering, communications and control, computer science, and agricultural/bionic engineering. This makes the journal more useful to authors with a demonstrable engineering contribution than to manuscripts that are merely multidisciplinary in a broad sense.

The source record provided for this article identifies the journal in Scopus under Source ID 145365. Because indexing and metrics can change, researchers should verify the current Scopus profile immediately before using the journal to satisfy a university, PhD, grant, or promotion requirement.

Key Takeaways

• Identity: ISSN 1671-5497; parallel English title Journal of Jilin University (Engineering and Technology Edition).
• Publisher/sponsor: Jilin University; the supplied Scopus record names the Editorial Board of Jilin University.
• Scopus: supplied Source ID 145365; verify current coverage directly in Scopus before submission.
• 2024 Scopus metrics: CiteScore 1.7, SJR 0.256, SNIP 0.583, Q2 in Multidisciplinary, as reported by university-library journal guides using Scopus metrics.
• Language: Chinese text with Chinese and English summaries according to authoritative serial records and official abstract guidance.
• Submission expectations: original work, relevant engineering scope, provincial/ministerial-level or higher funded-project basis, and at least 15 references in principle.
• Review workflow: editorial screening followed by external review by 3–5 experts for manuscripts that pass initial screening.
• Fees: the official guidance states there is currently no review fee; a current APC/publication fee was not clearly stated in the pages reviewed.

Journal Information at a Glance

What This Page Covers

• journal identity, publisher context and history
• aims, scope and engineering subject areas
• Scopus indexing and dated metrics
• research themes visible in recent issues
• manuscript requirements and abstract preparation
• online submission and peer-review workflow
• copyright, originality and publication-ethics expectations
• fees and open-access information that can and cannot currently be verified
• journal-fit examples and a pre-submission checklist
• ethical ways Contentxprtz can support publication readiness

Methodology and Source Note

This profile was prepared by cross-checking the supplied journal identifiers against the official journal website, the journal's official introduction and submission guidance, the copyright agreement, the ISSN International Centre record, and the supplied Scopus source profile. For Scopus metric values, this guide uses 2024 figures reproduced by university-library journal guides because an authoritative current Scopus page was not directly retrievable during review.

Journal indexing, metrics, editorial leadership, fees, author instructions and publishing policies are time-sensitive. Verify them again immediately before submission, particularly when a university or doctoral programme has a formal requirement for Scopus coverage or a particular quartile.

How the Journal Is Positioned Within Engineering Research

The journal is not a single-subdiscipline title. Its official scope brings together multiple engineering communities, but the breadth is still bounded by engineering relevance. The current site lists work in vehicle engineering, mechanical engineering, materials science and engineering, power engineering and engineering thermophysics, control science and engineering, computer science and technology, electronic science and technology, information and communication engineering, transportation engineering, and agricultural engineering.

Recent 2026 issue content reinforces that applied engineering identity. Topics visible on the official site include adaptive vehicle control, battery state estimation, fuel-cell systems, semantic mapping for unstructured terrain, software-defined Internet of Things, short-term traffic-flow prediction, deep excavation deformation, bridge safety, agricultural machinery and intelligent control. For manuscript selection, these examples are more useful than a generic label such as “Multidisciplinary” because they show the kinds of systems, methods and engineering problems currently reaching readers.

Editorial interpretation: a paper crossing multiple technical domains can still be a strong fit if its principal contribution is engineering rather than purely mathematical, managerial, educational or biomedical. A manuscript on machine learning, for example, is more likely to align when the learning method solves a concrete problem in vehicles, control, communications, transportation, machinery or another listed engineering field.

Journal Aims and Scope: What Research Is Most Likely to Fit?

The official journal introduction states that its purpose includes promoting academic exchange, supporting disciplinary development and advancing science and technology, while seeking high-level and innovative manuscripts from both inside and outside Jilin University. That wording matters: authors outside Jilin University are not excluded, but the manuscript still needs a strong match with the journal's stated engineering disciplines.

Core scope areas

• vehicle engineering and mechanical engineering
• materials science and engineering
• power engineering and engineering thermophysics
• control science and engineering
• computer science and technology
• electronic science and technology
• information and communication engineering
• transportation engineering, with civil-infrastructure themes also visible in current issues
• agricultural engineering and related bionic engineering themes

Research characteristics that strengthen fit

The current articles suggest a strong emphasis on technical novelty supported by modelling, simulation, experiments, system design, algorithm development or validated engineering analysis. A manuscript is therefore more persuasive when it goes beyond proposing a concept and demonstrates performance under realistic constraints, compares against relevant baselines, explains engineering significance and documents the method well enough to be assessed by specialist reviewers.

Work that may need another journal

A purely conceptual paper with no clear engineering problem, a management study without a technical systems component, a general AI paper disconnected from engineering application, or a manuscript in a discipline absent from the listed scope may face a fit problem. This is an editorial interpretation rather than a formal exclusion list. Authors should compare their topic with several recent articles before deciding.

Understanding Scopus Coverage and Journal Metrics

The supplied source data links the journal to Scopus Source ID 145365. For researchers whose institutions require “Scopus-indexed” publication, matching the exact journal title, ISSN 1671-5497 and Source ID is important because Jilin University publishes other journals with similar English names.

University-library journal guides report the journal's 2024 Scopus metrics as CiteScore 1.7, SJR 0.256 and SNIP 0.583. In the Multidisciplinary category, the same 2024 record is shown as Q2, rank 85 of 200, percentile 57. These numbers are useful context, not permanent properties. Scopus released later annual metrics after 2024, and the journal's current metric set should be checked directly in Scopus when a fresh value is required.

The official journal site also reports inclusion in EI Compendex and several other abstracting/indexing services, and a 2025 Jilin University announcement describes it as a CSCD core journal and a China Science and Technology Core Journal. These are distinct systems. A researcher should not treat EI, CSCD, Scopus and Clarivate JCR as interchangeable forms of indexing.

No current official Clarivate Journal Impact Factor was verified for this guide. The journal's own website has a historical “impact factor” table based on the Chinese Science and Technology Journal Citation Reports. That domestic metric should not be labelled as a Clarivate Journal Impact Factor.

What Does the Journal Publish?

The official guidance refers to academic papers and emphasises original, high-level and innovative results. The live issue pages also include review-type content among prominently viewed papers, such as technical research reviews. However, the general submission page reviewed does not provide a complete, explicit list of all accepted article types in the way many international publisher platforms do.

For practical planning, researchers should therefore avoid assuming that every common article type—short communication, methods paper, data paper, letter or systematic review—is accepted merely because another engineering journal accepts it. Check the current online submission categories and recent issues. If preparing a review article or a nonstandard format, confirm suitability with the editorial office first.

Who Should Consider Submitting?

This journal may be relevant to university researchers, PhD scholars, postdoctoral researchers, faculty and engineering professionals whose work falls squarely within the listed technical domains. It may be particularly suitable when the study is grounded in an engineering system and provides data, modelling, experiments or technical validation that can be evaluated by specialists.

One journal-specific requirement deserves attention early: the official author guidance states that a manuscript should be a principal research result of a project funded at provincial/ministerial level or above, and the funding project name and number should be provided accurately. Researchers without such funding should not ignore this line. They should verify the current rule with the journal before investing time in reformatting.

International authors should also consider language fit. The authoritative serial record lists Chinese as the text language and the journal provides detailed Chinese and English abstract instructions. A technically strong paper may still be unsuitable if the authors cannot meet the journal's current language and format requirements.

Preparing and Submitting a Manuscript

Originality and integrity

The official instructions require that a submission has not been published in another formally distributed publication and has no copyright infringement, authorship dispute, duplicate submission or confidentiality problem. This should be treated as a baseline condition before any formatting work begins.

Academic quality and references

The journal asks for clear arguments, reliable experimental data, rigorous logical derivation and concise writing. Reference entries must be complete. The guidance says references should generally number at least 15, encourages newer literature—especially international literature—and requires all authors in each reference to be listed rather than shortened automatically.

Chinese and English abstracts

The journal provides detailed abstract guidance. The Chinese abstract is expected to be about 200 Chinese characters and should state the purpose/problem, process/method, and results/conclusions. The English abstract is expected to be around 150 words and should correspond to the Chinese abstract. The guidance discourages self-evaluative phrases and unnecessary wording, and asks authors to focus on concrete new findings.

Online submission

The journal uses an online manuscript system. Authors register on the official website and follow the “online submission” or author/expert login pathway. The official workflow says a successful submission generates a receipt, and registered authors can track manuscript status online.

Files and formatting

The general guidance directs authors to the journal website for format details and templates. Because templates can change, download the current version rather than reusing an old paper as a formatting model. Confirm title-page elements, author affiliations, funding statement, abstracts, keywords, figures, tables, equations, units and references against the live instructions.

What Happens After You Submit a Manuscript?

The official workflow is unusually specific about the broad review route. After online submission, an editor receives the paper and assigns a manuscript number. The paper undergoes editorial initial screening. Manuscripts that pass are sent for external review, and the journal states that 3–5 experts are used for external review.

Following external review, the author may be asked to revise the manuscript. The editorial office or reviewers then consider the comments and revision when reaching the final result: acceptance or rejection. Accepted papers proceed to editorial processing and publication.

The journal guidance reviewed for this profile does not publish an official average peer-review duration or acceptance rate. Those figures should not be estimated from anecdotal websites. If timing is critical for a PhD submission, graduation deadline or funded project, contact the journal before submitting and plan for uncertainty.

Publication Fees, Open Access and Copyright

The official submission instructions state that the journal currently does not charge a review fee. That is the clearest verified fee statement found. A current article processing charge, page charge or publication fee was not clearly stated in the official pages reviewed, so this guide does not invent a number. Authors should ask the editorial office or inspect the latest submission system before assuming publication is free.

The journal's open-access model is also not described on the reviewed pages using a standard international label such as Gold OA, hybrid OA or subscription-only. Although article content can be accessed through the journal site, availability of full text does not by itself establish the author's reuse licence or an APC model.

The official copyright agreement is important. It states that once an article is published, authors grant the editorial office broad rights—including reproduction, distribution, online communication, translation, compilation and adaptation—for the copyright protection period. It also contains originality, anti-plagiarism and no-duplicate-publication commitments. Read the current agreement before submission, especially if your funder or institution has an open-access or rights-retention requirement.

Publication Ethics and Author Responsibilities

Journal-specific ethics language is embedded in both the submission guidance and copyright agreement. Authors are expected to submit original work, avoid plagiarism and duplicate submission, resolve authorship legitimately, protect confidential information and ensure the manuscript does not infringe the rights of others. The copyright document also includes a confidentiality-review certificate section.

As a practical publication-readiness step, maintain a clean record of raw data, analysis scripts, figure sources, permissions, author contributions and funding information. The official pages reviewed do not provide a complete international-style ethics manual covering every modern topic such as AI assistance, image manipulation, data availability and conflicts of interest, so authors should check the current submission forms for additional declarations.

Is This Journal a Good Match for Your Research?

A strong fit decision can be made with five checks: discipline, engineering problem, methodological precedent, funding eligibility and language/format readiness.

Practical Manuscript-Fit Examples

Example 1: Vehicle control with experimental validation

A study proposing an adaptive vehicle-control method, validated through simulation and road or bench testing, aligns closely with the vehicle/control themes visible in current issues. Strengthen fit by stating the engineering constraint, comparing against established controllers and quantifying performance gains.

Example 2: AI method for general image classification

A generic deep-learning classifier with no engineering system may be weakly aligned. The same methodology could become more relevant if applied to machine fault diagnosis, infrastructure monitoring, vehicle perception or another engineering problem that sits within the journal's readership.

Example 3: Transportation infrastructure resilience

Research on bridge monitoring, road infrastructure resilience, traffic-flow prediction or pavement behaviour has clear thematic precedent on the journal site. The manuscript should still establish novelty and use current engineering literature rather than relying on topic fit alone.

Example 4: Agricultural machinery and bionic engineering

A design-and-test paper on agricultural equipment, intelligent control or bionic engineering can fit the agricultural-engineering stream when it includes robust design reasoning, field or laboratory validation, and measurable outcomes.

Example 5: Unfunded technical study

Even a strong engineering manuscript may encounter an eligibility issue because the official author guidance states that submissions should be principal results of provincial/ministerial-level or higher funded projects. Before reformatting, contact the editorial office to confirm whether the current rule applies to your manuscript.

How to Prepare a Stronger Journal-Aligned Manuscript

Start with fit, not formatting. Read at least several recent papers in the closest subject section and note the typical problem scale, validation depth, equation density, experimental reporting, figure style, abstract structure and reference mix. This is not a substitute for the formal author instructions; it helps you understand the journal's editorial pattern.

Then tighten the paper around one defensible engineering contribution. The introduction should explain the unresolved technical problem, not simply review a field. Methods should make assumptions, boundary conditions, equipment, datasets and evaluation procedures reproducible enough for expert scrutiny. Results should quantify performance and compare against meaningful baselines. Discussion should connect outcomes to engineering use, limitations and failure conditions rather than restating tables.

Finally, run a journal-specific compliance check: funding statement, title, Chinese and English abstracts, keywords, figures, tables, equations, symbols, units, references, author names and submission declarations. A technically excellent study can still lose time at initial screening if these elements conflict with the journal's current requirements.

Common Reasons a Manuscript Could Be Unsuitable

• the research falls outside the journal's engineering disciplines
• the technical contribution is incremental or insufficiently validated
• the manuscript does not satisfy the stated funded-project expectation
• references are too few, incomplete or dated relative to the problem
• the abstract does not clearly report purpose, method, results and contribution
• the manuscript has already been published or is under review elsewhere
• authorship, copyright or confidentiality issues are unresolved
• the format does not follow the current journal template
• the paper uses a nonstandard article type without confirming that the journal accepts it

How Contentxprtz Can Support Publication Readiness

Contentxprtz can help researchers prepare a manuscript more clearly for this journal without claiming influence over editorial decisions. Relevant support can include manuscript assessment against the journal's scope, academic editing, technical language polishing, Chinese-to-English or English-language abstract refinement where appropriate, consistency checks, reference formatting, figure-caption editing, journal-format review, cover-letter editing and response-to-reviewer language support.

For authors moving from a thesis or dissertation to a journal article, support can also focus on reducing thesis-style background, sharpening the engineering contribution, reorganising methods and results, and improving readability while preserving the researcher's data, analysis and authorship. Contentxprtz does not guarantee acceptance, publication, indexing or peer-review success.

Explore journal publication-readiness support

Summary: Should You Consider This Journal?

Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) is an established Jilin University engineering journal with ISSN 1671-5497 and a supplied Scopus Source ID of 145365. It may be a relevant target for technically rigorous work in vehicle, mechanical, materials, energy, control, computing, electronics, communications, transportation and agricultural engineering.

Before submission, verify the current Scopus profile and metrics, confirm that your institution recognises the journal for your specific requirement, examine recent papers for methodological fit, and follow the journal's live author instructions. Pay particular attention to the stated funded-project condition, originality requirements, abstract preparation, reference expectations and copyright terms.

If your manuscript is scientifically ready but needs clearer language, tighter structure, journal-format alignment or publication-readiness review, Contentxprtz can provide ethical editorial support. The journal alone determines whether a manuscript proceeds through peer review and publication.