Precision Chemistry: Scopus Indexing, Scope, Metrics & Submission Guide

Quick Answer: What Is Precision Chemistry?

Precision Chemistry is an English-language, monthly, online journal launched in 2023. It publishes fundamental, applied and interdisciplinary work designed to advance precision across chemical science—from highly selective synthesis and molecular engineering to accurate computational chemistry, precision sensing, nanomanufacturing, life-science applications, energy conversion and environmental research.

The journal is relevant to researchers whose central contribution is not simply “chemistry” in a broad sense, but a demonstrable improvement in control, predictability, selectivity, accuracy, structural definition, measurement, manipulation or manufacturing. Authors should read the current aims and scope and compare their manuscript against recently published articles before assuming fit.

Key Takeaways

• Publisher: American Chemical Society, in partnership with USTC.
• Scopus: listed under Source ID 21101203232.
• ISSN: 2771-9316 (online/web edition).
• 2026 metrics reported by ACS: 7.7 2-Year Impact Factor, 7.7 5-Year Impact Factor, 8.4 CiteScore.
• Open access: fully open access; authors should verify current APC and institutional/funder coverage.
• Peer review: single-anonymous; ACS reports a 28.1-day median to first peer-review decision in 2026 data.
• Article types: Article, Comment, Letter, Perspective and Review; Highlight is invitation only.
• Best-fit manuscripts: research that clearly demonstrates precision in chemical calculation, design, synthesis, manipulation, measurement or manufacturing.

Precision Chemistry Journal Information at a Glance

What This Page Covers

• Precision Chemistry aims, scope and representative research themes.
• Scopus and other verified indexing information.
• Current journal metrics displayed by ACS in 2026.
• Article types, manuscript preparation and submission route.
• Peer-review model, open-access model and publication charges.
• Journal-fit assessment for PhD scholars and other researchers.
• Practical pre-submission and reviewer-response guidance.
• Ethical ways Contentxprtz can support publication readiness.

Methodology and Source Note

This profile was prepared from the supplied journal record and authoritative sources, with priority given to ACS Publications, the ISSN Portal and the supplied Scopus source link. Metrics, editorial roles, indexing, fees and publishing policies can change. Authors should therefore recheck the official journal pages immediately before submission rather than treating any directory article as a permanent source of current policy.

Precision Chemistry Aims and Scope

ACS describes the journal as a focused venue for fundamental, applied and interdisciplinary research that seeks precision in chemical calculation, design, synthesis, manipulation, measurement and manufacturing. The underlying idea is that better control and accuracy can enable more predictable outcomes across chemistry and chemistry-enabled fields.

Officially identified areas include precision and controllable synthesis with high selectivity and efficiency; molecular engineering of complex multifunctional systems; controlled self-assembly; macromolecular and supramolecular systems; nanotechnology and nanomanufacturing; function-oriented materials design; tunable catalysis; precision sensing, imaging and characterization; accurate and computationally efficient theoretical studies; life-science and medical applications; and energy and environmental applications.

For manuscript selection, this scope has an important practical consequence: a paper may be chemically sound yet still be a weak fit if “precision” is only incidental. Authors should be able to explain, in the abstract and cover letter, what is being controlled or measured more precisely, why the advance matters, and how it moves beyond routine optimization.

Representative Subject Areas and Research Topics

Based on the journal’s stated scope, potentially relevant themes include:

• high-selectivity and high-efficiency synthetic chemistry;
• precision catalysis and tunable catalytic systems;
• molecular machines, devices and complex functional molecules;
• controlled supramolecular self-assembly;
• precision polymers and macromolecular architectures;
• nanostructure control and nanomanufacturing;
• function-directed materials design;
• high-accuracy sensing, imaging and chemical characterization;
• atomistic simulation and high-accuracy computational chemistry;
• AI- or machine-learning-enabled chemical design and measurement;
• genome editing, protein engineering and enzyme engineering;
• molecular diagnostics and targeted therapeutics;
• energy conversion and energy storage;
• water-resource and environmental-remediation chemistry;
• carbon-neutrality and sustainable-chemistry applications.

This list is interpretive guidance derived from the official scope, not an exhaustive list of guaranteed acceptable topics.

Scopus Indexing and Other Abstracting Databases

The supplied journal record identifies Precision Chemistry as Scopus Source ID 21101203232. ACS also explicitly lists Scopus among the journal’s indexing and abstracting services. For researchers working under doctoral or institutional rules that require a Scopus-indexed journal, this is relevant evidence, but the final check should always be performed against the live Scopus source record near the submission date.

ACS additionally lists Web of Science ESCI, CAS, DOAJ, Sherpa Romeo and PubMed Central. The combination indicates broad discoverability across chemistry, open-access and multidisciplinary research systems. However, database inclusion does not replace a manuscript-fit assessment, and it should not be interpreted as a guarantee of acceptance, citation impact or institutional recognition.

Current Precision Chemistry Metrics

ACS’s journal page currently displays 2026 data showing 240,418 article downloads, 1,190 total citations, a 2-Year Impact Factor of 7.7, a 5-Year Impact Factor of 7.7 and a CiteScore of 8.4. It also reports median workflow indicators of 28.1 days to first peer-review decision, 62.5 days to acceptance and 9.4 days from acceptance to ASAP publication.

These figures are useful context, not promises. The time taken for an individual manuscript can vary because of editorial screening, reviewer availability, the complexity of the work and revision cycles. Similarly, citation indicators change each reporting cycle. A current Scopus quartile, SJR and SNIP were not independently verified from an official live metrics source for this article, so authors should check the latest applicable database rather than relying on undated ranking pages.

Publisher and Editorial Leadership

Precision Chemistry is published by the American Chemical Society in collaboration with USTC. The journal’s official about page identifies Jinlong Yang of the University of Science and Technology of China as Editor-in-Chief. Because editorial teams can change, authors should use the live ACS editorial-board page when they need current editor names or affiliations.

The partnership is relevant to the journal’s scientific positioning: it combines ACS’s publishing infrastructure with USTC’s participation in the journal. For authors, the practical issue remains the same—submit work that matches the stated scope and meets the journal’s editorial standard rather than attempting to infer acceptance likelihood from publisher reputation alone.

Types of Articles Published

ACS lists the following manuscript types for Precision Chemistry: Article, Comment, Letter, Perspective and Review. Highlight is also listed but is invitation only. Authors should select the manuscript type that best matches the length, evidence, novelty and purpose of their work and then follow the current article-type-specific instructions.

Recent journal content demonstrates a mixture of original research and reviews across catalysis, materials, sensing, computational chemistry, energy systems, molecular design and related precision-oriented fields. Reviewing several current issues is one of the most reliable ways to understand how the written scope is applied in practice.

Who Should Consider Submitting?

Precision Chemistry may be relevant to PhD scholars, early-career researchers, faculty members, interdisciplinary research teams and professionals whose work makes a clear precision-focused contribution. Academic status alone is not a selection criterion. A stronger signal of fit is whether the central scientific claim aligns with the journal’s emphasis on controlled, predictable or accurate chemical outcomes.

Researchers should be cautious if the manuscript is primarily descriptive, offers routine optimization without a clear precision advance, or sits outside chemistry and chemistry-enabled scientific areas. In such cases, a different journal may provide a better audience and editorial fit even if Precision Chemistry appears attractive from an indexing or metrics perspective.

How to Decide Whether Your Manuscript Fits Precision Chemistry

1. Define the precision contribution. State exactly what becomes more selective, controllable, predictable, structurally defined, measurable or manufacturable.
2. Compare with the official scope. Map the study to one or more areas explicitly described by the journal.
3. Review recent papers. Examine current issues and ASAP articles for related scientific questions and methodological standards.
4. Confirm article type. Ensure the intended format is one the journal accepts.
5. Assess significance for the readership. Explain why the advance matters beyond a narrow experimental improvement.
6. Check institutional requirements. Verify that current Scopus/Web of Science status and publication model satisfy any doctoral or funding rules.

Journal-Fit Checklist

• Does the manuscript directly match the journal’s aims and scope?
• Can you explain the precision advance in one or two sentences?
• Has the journal recently published related work?
• Is your manuscript type accepted?
• Will the broad chemistry readership understand the contribution?
• Are the methods and data strong enough to support the claims?
• Can you meet the journal’s graphical, data and supporting-information requirements?
• Have you verified current indexing, fees and open-access terms?
• Have all authors approved the target journal and submission?

Precision Chemistry Submission Guidelines

ACS instructs authors to submit through the ACS Publishing Center and to review the journal’s Information for Authors before beginning. A graphical summary for the table of contents is required. ACS also provides manuscript templates; their use is encouraged but not mandatory. The journal page specifies U.S. Letter page size for manuscript preparation rather than A4.

For manuscripts containing new unpublished organic, metal-organic or inorganic crystal structures, ACS provides detailed crystallographic-data requirements. Authors may need to deposit Crystallographic Information Files and related material with the CCDC before submission and upload CheckCIF output as supporting information for review. Because these requirements are study-specific, researchers working with crystallographic structures should read the current ACS instructions in full.

Manuscript Preparation and Formatting

Before submission, authors should confirm the current instructions for title, abstract, text organization, figures, tables, references, supporting information, author contributions, funding statements, conflicts of interest and data availability. ACS notes that manuscript templates are helpful but not compulsory. The safest approach is to work from the latest author-guideline page rather than an old downloaded template.

As a publication-readiness step, the manuscript should make the novelty and precision contribution visible early. The title and abstract should be technically accurate rather than promotional; figures should communicate the evidence efficiently; terminology, units and nomenclature should be consistent; and references should be checked against original sources. Language editing can improve clarity, but it cannot compensate for weak methods or unsupported conclusions.

Peer-Review Process and Publication Timeline

Precision Chemistry uses single-anonymous peer review. Authors do not know reviewer identities, while reviewers know the authors’ identities; the handling editor knows both. Manuscripts may first undergo editorial assessment before external review, and not every submission necessarily proceeds to peer review.

ACS’s 2026 metrics report a median 28.1 days to first peer-review decision, 62.5 days to acceptance, and 9.4 days from acceptance to ASAP publication. These figures describe past journal-level performance and should not be treated as guaranteed turnaround times for a specific manuscript.

Open Access, Licences and Publication Fees

Precision Chemistry is a fully open access journal. ACS explains that research articles in its fully open access journals are published under eligible Creative Commons licences, including CC BY or CC BY-NC-ND options depending on the applicable publishing arrangement. Published Precision Chemistry articles show Creative Commons licensing information on their article pages.

An APC may apply, but the exact cost can depend on current ACS pricing, licence choice, institutional read-and-publish agreements, funder arrangements and eligibility. Because these conditions can change, authors should use the official ACS open-access pricing and agreement checker immediately before submission or acceptance rather than relying on a static fee quoted elsewhere.

Publication Ethics and Responsible AI Use

ACS links Precision Chemistry authors to its ethical guidelines, prior-publication policy, copyright and permissions information, and peer-review policies. ACS also states that submitted manuscripts may be screened with iThenticate for similarity to published material. Authors should therefore ensure originality, accurate citation, appropriate authorship, truthful data reporting, disclosure of conflicts, and compliance with any applicable human, animal, biosafety or data requirements.

For generative AI, authors should follow the current ACS policy in force at the time of submission. AI tools should not be treated as authors, and researchers remain responsible for the accuracy, originality, confidentiality and integrity of all submitted content. Any required disclosure should be made exactly as the publisher instructs.

Practical Journal-Fit Examples

Example 1 — Strong scope match

A chemistry group develops a catalyst that delivers a substantial, mechanistically supported improvement in selectivity and controllability. This is plausibly aligned, provided the advance is significant and the evidence is rigorous.

Example 2 — Weak scope match

A manuscript reports routine optimization of a known material with small performance gains but no clear precision-oriented concept. Even if technically correct, it may be better suited to a more application-specific journal.

Example 3 — Computational precision

A study introduces a high-accuracy, computationally efficient method for atomistic simulation and validates it against demanding chemical systems. That maps directly to an area stated in the journal’s scope.

Example 4 — Formatting problem

A strong study arrives without the required table-of-contents graphic and with poorly prepared supporting information. Scientific quality may still be high, but avoidable technical deficiencies can slow processing and weaken presentation.

Example 5 — Major revision

An author receives reviewer requests for additional controls and clearer mechanistic interpretation. A strong revision should answer each point separately, identify manuscript changes precisely and explain respectfully where a suggestion cannot be implemented.

Pre-Submission Checklist

• Official aims and scope checked.
• Current Scopus status checked.
• Correct manuscript type selected.
• Latest ACS author guidelines reviewed.
• Table-of-contents graphic prepared.
• Figures, tables and supporting information checked.
• References and DOIs verified where applicable.
• Authorship and contributor roles confirmed.
• Funding and conflict-of-interest statements prepared.
• Data availability and ethics statements included where required.
• Crystallographic deposition completed when applicable.
• Open-access licence and APC implications understood.
• All authors approved the final submission.

How Contentxprtz Can Support Authors Preparing for Precision Chemistry

Preparing for a journal such as Precision Chemistry involves more than correcting grammar. Authors need to communicate a clear precision-focused contribution, present methods and results coherently, follow ACS requirements, prepare consistent references, and respond carefully to editorial or reviewer requests.

Contentxprtz can support researchers through manuscript assessment, academic editing, ESL language polishing, proofreading, journal formatting, reference consistency checks, title and abstract refinement, cover-letter editing, reviewer-response editing and publication-readiness review. Support is designed to improve the presentation of the author’s own research; it does not replace the researcher’s scientific responsibility or the journal’s editorial process.

Contentxprtz does not guarantee acceptance or publication and has no control over editorial decisions. All acceptance, rejection, peer-review and publication decisions remain solely with Precision Chemistry and its editors.

Explore Journal Publication Services

Summary: Precision Chemistry

Precision Chemistry is a monthly, English-language, fully open access journal launched in 2023 and published by ACS in partnership with USTC. It is indexed in Scopus under Source ID 21101203232 and is also listed by ACS in Web of Science ESCI, CAS, DOAJ, Sherpa Romeo and PubMed Central. The official online ISSN is 2771-9316.

ACS’s 2026 metrics display reports a 7.7 2-Year Impact Factor, 7.7 5-Year Impact Factor, 8.4 CiteScore and 28.1-day median to first peer-review decision. The journal accepts Articles, Comments, Letters, Perspectives and Reviews, with Highlights by invitation, and uses single-anonymous peer review. Researchers should select it primarily for scientific scope and audience fit, then confirm current indexing, policies and open-access charges immediately before submission.

Authoritative Sources Used

• ACS Publications — About Precision Chemistry
• ACS Publications — Precision Chemistry Information for Authors
• ACS Publications — Precision Chemistry journal home
• ISSN Portal — Precision Chemistry, ISSN 2771-9316
• Scopus — Source ID 21101203232